We know that the most important plasma cutting accessory is the torch through which the hot plasma is emitted. It is used to cut metals like steel copper, aluminum, etc. Therefore, torches are very important. We know that the plasma cutting equipment is easy to pull hence sometimes some workers find it difficult to move this plasma cutter from one place to another. To ease the work of such workers guides for using torch tip standoff were invented. The torch tip standoff is nothing but a holder for the torch to cut through metals. It is essentially used for cutting deep cuts and current levels at 60 amps. As said the standoff is nothing but a holder for the torch which helps in keeping the torch away from the work piece. This allows the tip to have a longer life as it is now not constantly exposed to the friction created by the hot plasma and the metal. This also helps save a lot of hassle and cost in the future.
 |
| Torch Tip Standoff |
Benefits of Using Torch Tip Standoff
Like every other equipment the standoff tip also has its own set of benefits.
- Cost: The guides for using torch tip standoff is not at all expensive and it also helps in avoiding other overhead costs that we have to face due to constant exposure of the tip to immense heat. The standoff tip essentially acts as a shield to the torch tip.
- Longer Life of the tip: Use of the standoff increase the life of the tip of the plasma cutter. The standoff is placed at an angle which helps in avoiding constant contact with the work piece. Since there is no constant contact with the work piece the slag generated is much less which helps to increase the life of the tip.
- Accuracy in Cuts: Since the standoff allows the torch tip to be at an angle we have more accurate cuts. The distance of the standoff from the work piece should not be too much and should not also be too less. We should avoid using the plasma cutter as a hammer over the work piece. It is important to understand that using torch tip standoff only gives us benefits and no regrets in return. The accuracy in cuts is also because torch tip standoff and guides for using torch tip standoff helps in keeping the cutter fixed at a position and not moving here and there. This also helps us in avoiding a lot of mistakes that we make while using the cutter freely.
- Ease of Use: The guides for using torch tip standoff help us in using the plasma cutter more appropriately and precisely. Therefore, the ease of using a standoff tip is something we cannot ignore altogether.
Hence, the above advantages of using the standoff tips should not be ignored. We need to make sure that guides for using torch tip standoff is followed thoroughly and there is no fault or mistakes in them. Therefore, we should try and encourage the usage of torch tip standoff as much as possible.
On the whole, these guides for using torch tip standoff can help you improve your plasma cutting methods. But do ensure that you check the compatibility of the tools and read through the instructions before starting off. Otherwise, there is a chance that you may not get desired results and in some cases this can also prove to be a safety hazard. So do make sure that you follow these suggestions and get the best from the torch tip standoffs.