There are lots of good reasons for using a plasma cutting guide, and only real users would know why they would never want to return back to any old tech stuff. All other old stuffs like the grinding disc, the oxy-fuel cutter etc never were as economical as the plasma cutters are, and with guides you get perfect shapes. Metal working has been really simplified and eased off with the application of this amazing cutting tool. With this plasma cutting torches, you can make some circle, holes or you can also cut the metal sheet as per your needs.
The Advantages of Plasma Cutters
- It runs on electricity and hence powers on immediately. You can easily operate these plasma cutting torches with a single switch and you can easily control the cutting edge with the same control panel.
- It’s a quick tool, and minimizes hours of operation and helps complete the work faster.
- Metal like steel, galvanized metals and steel, brass, copper, aluminum etc can all be cut using this.
- They are light weight and easy to handle as no gas bottles are withheld by the machine.
- The cutting width is smaller compared to oxy-fuel cutters, and therefore the small area that is heat affected cools faster and makes working easy while increasing safety.
 |
| Gas Cutting Torch |
So now you do not need to pursue any training for operating the plasma cutting torches and you can easily operate these torches by reading the manual only.
How to Handle a Plasma Cutter with the Guide?
You can handle a hand held plasma cutter with a guide in simple steps, and here they are:
- As per the machine model and power demand, you will have to connect the plasma cutter with a 415 or 240 volt supply.
- Connect the machine to an insulating earth connection.
- Now connect the torch with it.
- Now you will have to set the amperage, and remember that the thicker the metal is the higher will be the amp.
- Finally connect the needed guide to it, and set things on the metal.
- Now on putting on the switch the guide will do the job, as you simply balance your hands on the sheet, and help the guide twist and rotate.
How to Cut the Metal using the Guide?
You can cut from any point you wish. You may start from the periphery and enter towards the center. You may drill a hole in the middle of the metal sheet to, and then cut towards the periphery. This way you may plan and draw shapes of any kind you want. Circles, squares, ovals, triangle and many other abstract shapes can be cut out of the metal sheets using the plasma cutter torch guide.
What is a Perfect Template Kit you may need?
The perfect template kit, which will help you get any shape easily out of your gas and plasma torch are:
- The circle guide
- The roller guide
- Accessories for working
- Gas adapter bushes, stabilizer attachment, bevel attachment, magnetic pivot, link nut and long radius bar in the gas cutting kit.
- Long radius bar, plasma adapter bush, magnetic pivot, link nut, and suction pivot for the plasma kit.
Where to Get the Plasma and Gas Cutter torch Guides?
You can get guides from a good guide manufacturer who makes templates and accessories complaint with all the latest plasma and gas cutter torches in the market.
If you want to accomplish perfection and ease of working with fast completion of jobs, then you must grab your guide tool kit for your gas or plasma torch.